Find Harveter Machine, Tranmission Parts, Kubota Engine Parts on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
Home > Industry Information > Steel Round Plated Chrome Bar Ck45-Dia 20mm
Home > Industry Information > Steel Round Plated Chrome Bar Ck45-Dia 20mm

Steel Round Plated Chrome Bar Ck45-Dia 20mm

2021-05-17

Length: 1000-6000mm
Shaft Diameter: 3-120mm
Straightness: 0.12 /1000mm
Precision: F7
Surface Hardness: HRC58-60
Surface Hardening Depth: 0.8-3mm
Roughness: Ra 0.2μm~0.4μm
Chrome Layer Hardness: Hv800-1000
Trademark: WF
Transport Package: Paper Sleeve and Wooden Box
Specification: dia 3-120mm
Origin: China
HS Code: 8483109000
Length: 1000-6000mm
Shaft Diameter: 3-120mm
Straightness: 0.12 /1000mm
Precision: F7
Surface Hardness: HRC58-60
Surface Hardening Depth: 0.8-3mm
Roughness: Ra 0.2μm~0.4μm
Chrome Layer Hardness: Hv800-1000
Trademark: WF
Transport Package: Paper Sleeve and Wooden Box
Specification: dia 3-120mm
Origin: China
HS Code: 8483109000
Main Products:

Hard Chrome Plated Rod, Hydraulic Piston Rod, Cylinder Piston Rod, Chromium Rods, Steel Round Bars, Hard Chrome Steel Bars, Linear Shafts, SBR Shafts, Hard Chrome Shaft, Induction hardened Hard Chrome Plated Rod, Ground Rod Round Shaft, etc.

the range of Diameters include: 3-120mm
 
 Item  OD mm                                                                
Hard Chrome Rod   3 10  12  13  14  15  16  17  18  20  22  25  28  30  32  35  40  45  50  55  60  65  70  75  80  85  90  100  110  120 
Induction Hard Chrome Rod  3 10  12  13  14  15  16  18  20  22  25  28  30  32  35  40  45  50  55  60  65  70  75  80  85  90  100  110  120 

Steel Round Plated Chrome Bar Ck45-Dia 20mm
Steel Round Plated Chrome Bar Ck45-Dia 20mm

Steel Round Plated Chrome Bar Ck45-Dia 20mm


Steel Round Plated Chrome Bar Ck45-Dia 20mm


The hard chromium piston rods produced by our company come with more than JIS S45C material, where the rods first undergo precision milling and processing, and are then put through gard surface chromium treatment, allowing a surface precision level of f7, and a surface hardness reaching HV800 minimum and up, which not only help to improve wear resistance but also help to extend the life cycle of the rods, thus helping the customer save cost.

The corrosion resistances is tested in our own internal salt spray laboratory, and The rods surface heat treatment and hardness reaching HRC55°±2°, and at a hardened depth of between 0.5mm - 3mm, before the rods are put through precision milling and hard chromium treatment for a membrane thickness measuring 20 micron ± 10% to drastically improve the rod's wear resistance, and help to extend the life cycle of the rods.


1. Chrome Plated Steel Bars:

Our Chrome Plated Bars are produced from medium carbon cold-finished or hot rolled steel bars usually in 1045 grades. The bars are centerless ground, polished, and chrome plated to a minimum thickness of 0.0005", and 0.001" per side. 
Chrome Plated bars are specifically designed to be used for most piston rod applications in hydraulic and pneumatic cylinders.

2.  Induction Hardened Chrome Plated Bars:

Our  Induction Hardened Chrome Plated Bars are produced by using advanced processing techniques usually on JIS S45C, SAE1045 or DIN CK45 steel rods, for surface removal, polishing, induction hardening, followed by hard chrome plating to a thickness minimum of 0.0005" or 0.001" per side. The finished product results in a superior impact resistant bar ideal for high quality piston rods capable of handling tough environments.

Applications:

Linear Motion Guides, Hydraulic cylinder rods
plastic injection molding machines, construction equipment, rubber molding machines, papermaking machines, printing machines, refrigeration equipment, foods and chemical machinery, loading equipment, fiber spinning equipment, textile machinery, agricultural equipment, automotives, shipbuilding and the like.



3. Cold Drawn Seamless Mechanical Tubing (CDS)

is a cold drawn 1020 steel tube. Produced from piercing hot rolled bar stock, the cold drawing process increases the tube's physical properties reducing the cost of machine time. Cold drawn seamless tubing provides a better uniformed OD and ID, enhanced machinability, increased strength, and tighter tolerances compared to hot finish seamless products

Applications:

Hydraulic cylinders
Truck and Automotive parts
Heavy equipment
Agricultural components
Auto and Truck Axles, Suspension parts and shock absorbers
High Speed Shafts and rollers
Bearings and Spacers, Roll cages, and many other machined tubular parts.


If you are interested in our company, please feel free to contact us:


SUZHOU WEIPENG PRECISION MACHINERY CO., LTD
ADD: No.217 Ruiqi Building, No.668 Fengting Street, Suzhou Industrial Park P.R.C
Tel: 0086-512-68387269 
Fax: 0086-512-68387269
 http://www.wepauto.com
http://www.chromedbar.com
Main Products:

Hard Chrome Plated Rod, Hydraulic Piston Rod, Cylinder Piston Rod, Chromium Rods, Steel Round Bars, Hard Chrome Steel Bars, Linear Shafts, SBR Shafts, Hard Chrome Shaft, Induction hardened Hard Chrome Plated Rod, Ground Rod Round Shaft, etc.

the range of Diameters include: 3-120mm
 
 Item  OD mm                                                                
Hard Chrome Rod   3 10  12  13  14  15  16  17  18  20  22  25  28  30  32  35  40  45  50  55  60  65  70  75  80  85  90  100  110  120 
Induction Hard Chrome Rod  3 10  12  13  14  15  16  18  20  22  25  28  30  32  35  40  45  50  55  60  65  70  75  80  85  90  100  110  120 

Steel Round Plated Chrome Bar Ck45-Dia 20mm
Steel Round Plated Chrome Bar Ck45-Dia 20mm

Steel Round Plated Chrome Bar Ck45-Dia 20mm


Steel Round Plated Chrome Bar Ck45-Dia 20mm


The hard chromium piston rods produced by our company come with more than JIS S45C material, where the rods first undergo precision milling and processing, and are then put through gard surface chromium treatment, allowing a surface precision level of f7, and a surface hardness reaching HV800 minimum and up, which not only help to improve wear resistance but also help to extend the life cycle of the rods, thus helping the customer save cost.

The corrosion resistances is tested in our own internal salt spray laboratory, and The rods surface heat treatment and hardness reaching HRC55°±2°, and at a hardened depth of between 0.5mm - 3mm, before the rods are put through precision milling and hard chromium treatment for a membrane thickness measuring 20 micron ± 10% to drastically improve the rod's wear resistance, and help to extend the life cycle of the rods.


1. Chrome Plated Steel Bars:

Our Chrome Plated Bars are produced from medium carbon cold-finished or hot rolled steel bars usually in 1045 grades. The bars are centerless ground, polished, and chrome plated to a minimum thickness of 0.0005", and 0.001" per side. 
Chrome Plated bars are specifically designed to be used for most piston rod applications in hydraulic and pneumatic cylinders.

2.  Induction Hardened Chrome Plated Bars:

Our  Induction Hardened Chrome Plated Bars are produced by using advanced processing techniques usually on JIS S45C, SAE1045 or DIN CK45 steel rods, for surface removal, polishing, induction hardening, followed by hard chrome plating to a thickness minimum of 0.0005" or 0.001" per side. The finished product results in a superior impact resistant bar ideal for high quality piston rods capable of handling tough environments.

Applications:

Linear Motion Guides, Hydraulic cylinder rods
plastic injection molding machines, construction equipment, rubber molding machines, papermaking machines, printing machines, refrigeration equipment, foods and chemical machinery, loading equipment, fiber spinning equipment, textile machinery, agricultural equipment, automotives, shipbuilding and the like.



3. Cold Drawn Seamless Mechanical Tubing (CDS)

is a cold drawn 1020 steel tube. Produced from piercing hot rolled bar stock, the cold drawing process increases the tube's physical properties reducing the cost of machine time. Cold drawn seamless tubing provides a better uniformed OD and ID, enhanced machinability, increased strength, and tighter tolerances compared to hot finish seamless products

Applications:

Hydraulic cylinders
Truck and Automotive parts
Heavy equipment
Agricultural components
Auto and Truck Axles, Suspension parts and shock absorbers
High Speed Shafts and rollers
Bearings and Spacers, Roll cages, and many other machined tubular parts.


If you are interested in our company, please feel free to contact us:


SUZHOU WEIPENG PRECISION MACHINERY CO., LTD
ADD: No.217 Ruiqi Building, No.668 Fengting Street, Suzhou Industrial Park P.R.C
Tel: 0086-512-68387269 
Fax: 0086-512-68387269
 http://www.wepauto.com
http://www.chromedbar.com

Quenched and tempered steel bar is produced by quenching and tempering which is one kind of heat treatment to get high mechanical properties and hardness. Our advantages and more services of quenched and tempered steel bar includes:

1) Wide range of diameters from 10mm to 100mm

2) Customized Length from 100mm to 12000mm

3) Good surface roughness: 0.4um to 1.5um

4) Good straightness: 0.5mm/m to 2mm/m

5) Good roundness: 80% of diameter tolerance

6) Diameter tolerance: -0.02mm to -0.06mm/h9, h10, h11

7) Matched further processing: Grinding, polishing, straightening

8) Anti-rusty package

9) Full sets of testing equipment: Surface, Dimenstion. Mechanical properties testing

10) Fast delivery time


Aisi 4140, Aisi 4130, Round Bar S45C, Astm A193 B7
Nofia Machinery Factory http://www.sdbrightsteelbar.com